Low temperature dehumidifier

Model: DY-ZL210 Category:

Description

Working Principle for low temperature dehumidifier

…………………………………………………………………………………………………………………………………………………………………………………………….

On either side of the wheel, the entire surface is divided into two sectors by highly hermetically sealed partitions, the treatment sector and the regenerative reduction sector. When the dehumidified air enters the treatment area, the water vapor is adsorbed by the carrier in the runner and dried, and the latent heat is released. The dried air is sent out of the system by the fan. With the increase of water absorption, the treatment sector tends to be saturated. In order to maintain its stable dehumidification performance, the saturated rotor part is driven by the motor and transferred into the regeneration area to begin the regeneration process. Regeneration air after heating to 100-140 ℃, the reverse blowing regeneration area, high temperature condition, the runner has adsorption in water by stripping, release a large amount of sensible heat at the same time, its temperature is reduced, became wet with water, air, and to the outside, thus completed the transfer of moisture, restore the wheel strong ability of moisture absorption, again into the work area for dehumidification. The above process of dehumidification and regeneration occurs at the same time, the air is constantly dried, the wheel is constantly recycled, and the cycle, thus ensuring the dehumidifier continuous and constant working state.

 

Additional information

Model

DY-ZL210

Extraction

0.7kg/h

Power Supply

220V/50Hz

Power Consumption

760W

Air Volume

210m3/h

Noise Level

45dB(A)

Operating Temperatures

-20°C-40°C

Net Weight

32kg

Product Size (W×D×H)

415 × 370 × 345 mm

Contact Us

=
back to top